Filter
Top Products
48
NOTE: The ignition switch must be in the ON or ACC position and the
radio power turned ON before the CD player will operate.
NOTE: If your vehicle is not equipped with the CD Changer option, you
will not be able to use the Navigation system and the CD Player simulta-
neously. Always remove the Navigation DVD before inserting another
disc.
WARNING: Always check the CD player for discs be-
fore inserting another disc. Failure to do so may
cause damage to the system.
Inserting a CD
You may insert or eject a disc with the radio off. If the radio
is on, the unit will switch from radio to CD mode and begin
to play when you insert the disc. The display will show the
track number and index time in minutes and seconds. Play
will begin at the start of Track 1.
NOTE: The unit may take 10-12 seconds to determine if the disc in-
serted is a CD or DVD (map disc) before switching to the correct mode.
Ejecting a CD
Press the EJT button. The disc will unload and the unit will
switch to the radio mode. If you do not remove the disc
within 15 seconds, it will reload and begin to play. The disc
can be ejected with the radio and ignition off.
Playing a CD
Once the CD is loaded, the Track screen will be displayed
and the CD will begin to play.
To return to AM/FM mode, press the AM/FM button. This
will halt CD operation. To return to CD mode, press the CD/
AUX button. The CD will resume from the point at which it
was stopped.
Play Options
Press and hold the TUNE button to fast forward or rewind a track.
To stop fast forward or rewind, release the TUNE button.
Press the top of the SEEK button to go to the next track on
the CD. Press the bottom of the button to return to the begin-
ning of the current track, or return to the beginning of the pre-
vious track if the CD is within the first second of the current
track.
CD PLAYER OPERATION