Filter
Top Products
6. Press
E
.
The scanner exits the
Trunking
Programming mode,
acquires the data
channel, and begins
searching using the
preset map you
chose.
Note: You will now begin to see Type I
Fleet-Subfleet IDs. For example, 100-12, 100-9,
000-12, 400-8, etc. See User Defined Fleet Maps
in the Appendix for more information about Type I
IDs.
How do you know if the preset map is correct? You’ll have
to listen to see if you’re following complete conversations.
If not, you should try another preset map.
Programming a Fleet Map
You may want to read User Defined Fleet Maps in the
Appendix before programming a fleet map. It contains a
detailed explanation of Scanner Fleet Map Programming,
as well as a table listing the Fleet Map Size Codes.
1. Select the Trunking
Programming mode
and the bank you
want to change.
2. Press
D
.
3. Use
)
or
(
to choose
E1
.
4. Press
D
.
5. Use
)
or
(
to choose
USr
.
12345678910
BANK
TRUNK
12345678910
BANK
TRUNK
12345678910
BANK
TRUNK
52