Filter
Top Products
Connecting the Charger to Your Scanner
You can charge both batteries at the same time. To fully
charge both batteries, you should leave the AC
Adapter/Charger connected for 14 – 16 hours.
1. Follow steps 1 and 2
under
Charging the
Spare Battery
on
page 12, then
connect the charging
lead on the CRX120
to the charging jack
on your scanner.
2. When charging is
complete, disconnect
the CRX120 from
your scanner, then
unplug the AC
Adapter/Charger from
the CRX120.
Adapter Safety Feature
The AC Adapter included with this scanner may be
equipped with a polarized line plug — a plug with one
blade wider than the other. This plug will fit into a power
outlet only one way. If you are unable to insert the
adapter’s plug into an outlet, try reversing the plug.
DCIN 12 V
13