Filter
Top Products
Basic Operation
Note: You can fold out the Front Cover to see the
Controls and Indicators while reading this Guide.
Setting the Squelch
To set the squelch, you must be in the Manual mode, and
you should not be receiving a signal on your scanner.
1. Press
M
until you do
not hear a signal.
2. Adjust
VOLUME
to a
comfortable listening
level.
3. Think of the Squelch Control as a gate. Turn
SQUELCH
fully counter-clockwise. This raises the
“Squelch Gate” so high that only very strong signals
can get through.
STRONG SIGNALS
MEDIUM SIGNALS
WEAK SIGNALS
NOISE
15