Filter
Top Products
2. Press and hold
O
for about two seconds.
You will hear two
beeps when all the
channels have been
restored.
Priority Scan
When Priority Scan is turned on, your scanner checks the
priority channel every two seconds for activity. If a signal is
present on the priority channel, your scanner monitors the
channel until the transmission ends, then resumes normal
scanning. You can designate one channel in each bank as
a Priority Channel.
To activate Priority Scan (in either the Manual or Scan
Mode):
1. Press
P
.
Note: If you have
locked out the priority
channel, this
message appears
when you select
Priority mode.
2. Press
P
again at
anytime to deactivate
Priority Scan.
12345678910
12345678910
25