Filter
Top Products
CRX120 Battery Charger
The CRX120 charger allows you to charge the extra
battery included with your scanner. You can also charge
the battery inside your scanner at the same time. This way
you can always have a charged battery ready to go.
Charging the Spare Battery
To fully charge the extra battery in the CRX120, you
should leave the battery in the charger for 14 – 16 hours.
1. Plug the cable from
the BP180 into the
connector in the
CRX120. Make sure
the red wire matches
RED
and the black
wire matches
BLK
on
the charger.
2. Place the battery in
the charger, and plug
the AC Adapter into a
wall outlet.
Then connect the
adapter to the
charger.
The red LED on the
charger will light,
indicating that the
battery is charging.
CHARGE
BLK
RED
DCIN 12 V
12