Filter
Top Products
If you have programmed frequencies for a trunked system
in one or more of the 10 available banks and you are in
conventional mode, follow these steps to begin trunk
searching:
1. Press
T
.
The bank indicators
begin to flash.
2. Use the keypad to
select the trunked
bank you want. For
example press
2
.
Note: You will see
the frequencies
quickly displaying as
your scanner looks
for the data channel
which controls the
system.
Once the data
channel is acquired,
the scanner begins
trunk tracking. Talk
group ID’s, which
represent different
service groups, begin
to display.
3. Press
T
again to
return to conventional
scanning mode.
While searching, you won’t know exactly who the ID’s are
assigned to until you listen awhile or until ID lists are
available in frequency guides or on internet sites. However,
it usually only takes a few minutes to figure out police, fire,
and emergency medical personnel. Other IDs may take
some time, but determining who each ID represents is half
the fun of
TrunkTracker™
.
12345678910
BANK
TRUNK
40