Filter
Top Products
Search Hold Feature
1. Press
H
at anytime
to stop the search.
2. Press
)
to move to
the next higher
frequency
—OR—
3. Press
(
to move
down to the previous
frequency.
4. Press
R
to resume
searching.
Data Skip
A scanner will normally stop on any transmission it
receives. This means the
BC 235XLT
will stop on data
signals and unmodulated transmissions. You can
automatically skip many of these types of transmissions
during searches.
1. Press
D
to activate
the data skip feature.
The
d
indicator
appears on the
display.
2. Press
D
again to
cancel the data skip
feature.
The
d
indicator
disappears from the
display.
When data skip is active, your scanner may pause
momentarily on an unwanted signal but will resume
searching in 2 or 3 seconds. Data Skip does not function
when the
AIR
Band is selected.
12345678910
12345678910
12345678910
12345678910
12345678910
28