Filter
Top Products
8
Notes
• When you connect via the DIGITAL OPTICAL IN
connector, noise may occur when you play CD
software other than music, such as a CD-ROM.
• If “Din Unlock” or “Cannot Copy” flashes in the
display, recording via the DIGITAL OPTICAL IN
connector is not possible. In this case, record the
sound source via the ANALOG IN jacks with
“ANLG” selected by the INPUT button.
• Do not place heavy objects such as an amplifier,
deck, etc. on top of the recorder.
Connecting a computer
Use the supplied USB cable to connect a
computer to the recorder. By connecting the
recorder to a computer, you will be able to
select and play the tracks and do various HDD
editing operations from the computer. For
details, refer to the supplied “M-Crew for
HAR-D1000 Operating Instructions”.
Demonstration mode
When you turn on the recorder and there is no
CD in the recorder, demonstration mode is
activated automatically when the recorder is
stopped for about 10 minutes. To deactivate
the demonstration mode, press any button on
the recorder or on the remote.
Tip
By pressing the CD x and CLEAR buttons at the
same time, you can turn off the demonstration mode.
Demonstration mode is turned off until you
disconnect the power cord of the recorder and
reconnect it.
Hooking up the system (continued)