Filter
Top Products
16
3 Turn ALBUM dial (or press ALBUM +/–
on the remote repeatedly) until
“LS(T) –XXdB” appears in the display,
then press ALBUM dial or YES.
4 Turn ALBUM dial (or press ALBUM +/–
on the remote repeatedly) to select the
level, then press ALBUM dial or YES.
You can set the level at any value between
–72 dB and 0 dB, in 2 dB increments
(–50 dB is the factory setting).
5 Press MENU/NO.
Tips for Level Synchro Recording
• When recording from a CD player or an MD deck
connected to the DIGITAL OPTICAL IN
connector, the entire material might be recorded as
a single track in the following cases:
– When you consecutively record the same track
two or more times using single-track repeat play.
– When you consecutively record two or more
tracks with the same track number but from
different CDs or MDs.
– When you record tracks from certain CD or
multi-disc players.
• When recording from a component connected to the
ANALOG IN jacks with “T.Mark Off” selected or
when recording from a DAT deck or DBS tuner
connected to the DIGITAL OPTICAL IN
connector, the entire material may be recorded as a
single track.
Tips
• You can mark track numbers even after recording
has finished. (see “Dividing Recorded Tracks” on
page 24)
• To restore the factory setting, press CLEAR while
setting the trigger level in step 4.
Notes
• If this function is activated when the 400th track is
reached, recording stop.
• When recording from a CD, a track number might
not be marked for tracks less than 4 seconds in
length.
Erasing blank portions
automatically
(Smart Space/Auto Cut)
The Smart Space function lets you make the
blank spaces between tracks 3 second long
automatically. If the Smart Space function is
on and there is no sound input for about 3
seconds or more (but less than 30 seconds)
during recording, the recorder replaces this
silence with a blank of about 3 seconds and
continues recording:
Auto Cut: When the Smart Space function is
on, if there is no sound input for 30 seconds or
more, the recorder replaces this silence with a
blank of about 3 seconds and enters recording
pause.
1 While the recorder is stopped or
recording pause, press MENU/NO.
“Edit Menu” appears in the display.
2 Turn ALBUM dial (or press ALBUM +/–
on the remote repeatedly) until
“Setup?” flashes in the display, then
press ALBUM dial or YES.
“Setup Menu” appears in the display.
Recording tips (continued)
No sound input for 30 seconds or more
Off
Replaced with a blank of 3 seconds and
recording pauses
On
No sound input for less than 30 seconds
Off
Replaced with a blank of 3 seconds and
recording continues
On