Filter
Top Products
24
Erasing all tracks in an album
(Album Erase)
Do the procedure below to erase all tracks,
track names, album name and artist name at
once.
1 While the recorder is stopped, playing
or paused, press MENU/NO after
selecting the album you want to edit.
“Edit Menu” appears in the display.
2 Turn ALBUM dial (or press ALBUM +/–
on the remote repeatedly) until
“Album Ers?” flashes in the display,
then press ALBUM dial or YES.
“Album Ers??” flashes in the display.
3 Press ALBUM dial or YES.
“Complete!” appears for a few seconds.
Notes
• Once an album is erased by the Album Erase
function, it cannot be restored, even if you use
Undo function.
• Do not turn off the recorder while “Erasing”
appears in the display.
Dividing recorded tracks
–– Divide Function
You can use this function to mark numbers
after recording. The total number of tracks in
the album increases by one and all the tracks
following the divided one are renumbered.
When using the remote, set SELECT to HDD.
Example: Dividing track 2 into two tracks
12 3
123 4
A
AB C D
CBD
1 While the recorder is stopped, playing
or paused, press MENU/NO after
selecting the album you want to edit.
“Edit Menu” appears in the display.
2 Turn ALBUM dial (or press ALBUM +/–
on the remote repeatedly) until
“Divide?” flashes in the display, then
press ALBUM dial or YES.
3 Turn ALBUM dial (or press ALBUM +/–
on the remote repeatedly) until the
track number you want to divide
flashes, then press ALBUM dial or YES
at the dividing point.
“– Rehearsal –” appears and the recorder
repeatedly plays several seconds of the track
from the point where you pressed the
ALBUM dial or the YES button.
4 While monitoring the sound, turn
ALBUM dial (or press ALBUM +/– on
the remote repeatedly) to locate the
dividing point.
You can shift the starting point in 1-frame
(f) intervals (1 frame = 1/43 second)
The time indication (minute, second and
frame) of the current point is displayed and
the recorder plays several seconds of the
track from that point repeatedly.
To find a point quickly
Specify the unit (minute, second or frame)
by pressing the HDD l/L buttons
repeatedly. The selected unit flashes in the
display.
5 Press ALBUM dial or YES.
“Complete!” appears for a few seconds.
The newly created track starts playing.
Note that new track has no name.
Track
number
After
DIVIDE
Divide track 2 into
track B and C
Original
tracks
Erasing recordings (continued)