34
HDD
The HDD does not play.
• Moisture has condensed inside the recorder.
Leave the recorder turned on for about an hour.
• Press @/1 to turn the recorder on.
The HDD does not record.
• Make connections properly to the sound source.
• The sound source is not connected to the selected
input connector. Select the correct input
connector using the INPUT button.
• The recording level is not adjusted properly.
Adjust the recording level properly (see page
17).
• There has been a power failure or the power cord
has been disconnected during recording. Data
recorded to that point may be lost. Repair the
recording procedure.
• Recording to play lists (album numbers 501 to
510) is not possible. Make sure a play list is not
displayed.
The HDD does not edit.
• Press PLAY MODE on the remote repeatedly
until “SHUFFLE” disappears.
The sound has a lot of static.
• Strong magnetism from a television or similar
device is interfering with operations. Move the
recorder away from the source of strong
magnetism.
Display Messages
One of the following messages may appear or
flash in the display during operations. Also,
the recorder has a Self-Diagnosis Function.
Album Full!
There are no more albums containing no tracks on
the HDD. It is not possible to record tracks to
create a new album.
Auto Cut
The recorder is pausing the recording because
silence continued for 30 seconds or more during
digital recording.
Blank Disc
There is no track on the HDD.
Cannot Copy
You tried to play a CD with a format that the
recorder does not support, such as a CD-ROM.
The sound source is a copy of commercially
available music software.
Cannot Edit
You tried to edit in Shuffle Play, or you tried to
register a track to a play list that already contains
400 tracks.
Cannot Play
The recorder cannot play the track because of
damage to the audio data.
Cannot Rec
You tried to record a track while a play list was
displayed.
CD Error!
An operational error has occurred in the recorder.
Wait a few seconds, and then try the operation
again.
Changer Err
The CD changer malfunctioned. Check the power
of the CD changer or status of the disc.
Din Unlock
A moment’s lighting is due to the signals of the
digital program being recorded. This does not
affect the recorded material.
While recording from a digital component
connected through the DIGITAL OPTICAL IN
connector, the digital connecting cable was
unplugged or the digital component turned off.
Drive Error
Consult your nearest Sony dealer.
Drive Full!
Recording tracks is not possible because there is
not enough recordable space on the HDD or the
maximum number of recordable tracks has been
reached.
Troubleshooting (continued)