Filter
Top Products
28
8 Repeat steps 5 through 7 to enter the
rest of the name.
To change a character
Press HDD l/L repeatedly until the
character you want to change flashes, then
repeat steps 5 and 6.
To erase a character
Press HDD l/L repeatedly until the
character you want to erase flashes, then
press CLEAR.
9 Press YES.
“Complete!” appears for a few seconds.
Assigning a title using the
remote
1 After selecting the album you want to
edit, press NAME EDIT/SELECT
depending on what you want to name.
To name
A track
An album or
play list
A flashing cursor appears in the display.
Note
You cannot assign an artist name using the
remote.
2 Press NAME EDIT/SELECT repeatedly
to select the character type.
Each time you press the button, the display
changes as follows:
“Selected AB” (Upper cases or symbols*)
t “Selected ab” (Lower cases or
symbols*) t “Selected 12” (Numbers)
* Only ’ – / , . ( ) : ! ? can be selected.
You can enter a space by pressing the 10/0
button.
Assigning a title or artist name to a
track, album or play list (continued)
3 Enter a character using letter/numeric
buttons.
If you have selected upper cases
or lower cases
1 Press corresponding letter/numeric button
repeatedly until the character you want to
enter flashes.
Or press ALBUM +/– repeatedly.
2 Press >.
The flashing character is entered and
lights continuously and the cursor shifts
to the right.
4 Repeat steps 2 and 3 to enter the rest
of the name.
To change a character
Press ./> repeatedly until the
character you want to change flashes, press
CLEAR to erase the character, then repeat
steps 2 and 3.
5 Press YES.
“Complete!” appears for a few seconds.
Renaming a track, album or
play list
1 Do steps 1 through 4 of “Assigning a
title or artist name using the controls
on the recorder” on page 27 or step 1
of “Assigning a title using the remote”
on this page.
A title or artist name appears in the display.
Note
You cannot reassign an artist name using the
remote.
2 Press and hold down CLEAR until the
selected name is erased completely.
3 Do steps 5 through 8 of “Assigning a
title or artist name using the controls
on the recorder” on page 27 or steps 2
through 4 of “Assigning a title using
the remote” on this page.
4 Press YES.
“Complete!” appears for a few seconds.
Press while
The recorder is playing or
recording. (the track number is
displayed)
The recorder is stopped with the
total number of tracks displayed.