Filter
Top Products
28
29
- Select “OK” to reboot the unit. Upon restarting, SoundBridge should automatically
connect to the network you have specied.
If the connection is successful, all the available iTunes and/or SlimServer music libraries will be
listed on your screen. Use the up and down arrows on your remote to navigate to your desired
library and press Select to begin browsing your music library.
Troubleshooting Wi-Fi Setup
If you have problems connecting to the SoundBridge to your music library via Wi-Fi, please
check the following:
1. Are the LED lights lit up inside the CompactFlash Wi-Fi adapter? If not, your card is not
receiving power. Make sure the SoundBridge is powered on (the LED screen is lit).
Remove and re-insert the CF card with the label facing away from you. It should require
gentle pressure to be inserted into the CF slot.
2. Is SoundBridge within range of your wireless network signal? Performance varies
depending on wireless network hardware, physical barriers such as walls, and signal
interference.
3. Is your computer on and your wireless access point plugged in?
4. Is iTunes or SlimServer launched and running on your computer?
5. Did you enter your password correctly (if you have one), including case sensitive
characters?
Obtaining your wireless access point’s password
Follow these instructions to determine your wireless access point password, and be sure to
have a pen ready to make a note of the case-sensitive password as well as the password type,
either hexadecimal (hex) or ASCII.