Filter
Top Products
8
9
6. Establishing a Network Connection
Wired Ethernet Network: After you have
connected SoundBridge to your computer
via a switch/hub/router (or directly to your
computer via crossover cable) and powered
up the unit, SoundBridge will auto-congure
its network settings (using DHCP or AutoIP).
There is nothing you need to do. If for
some reason you have trouble connecting
to your network, select the “SYSTEM
CONFIGURATION” option, then select “SHOW
WIRED ETHERNET STATUS.”
Wireless Network: If you have a Wi-Fi
network in your home, with no security keys
set, then SoundBridge will also auto-connect
to your wireless network. If SoundBridge
detects more than one Wi-Fi network (as
some advanced users have in their home, or
if your neighbor’s signal is leaking over), then
you will be asked to select the SSID (network
ID) to connect to.
If you have a security key, you will need
to enter your WEP key manually into
SoundBridge. This is the same key you have
entered into your Access Point and your
computer. Your screen will look something
like this:
[NO MUSIC LIBRARIES FOUND]
SYSTEM CONFIGURATION
Scroll down on this screen using your
down 6arrow until the option “SYSTEM
CONFIGURATION” is highlighted, and press
Select on your remote control. You will see a
screen that looks like this:
CHECK FOR NEW SOFTWARE-CURRENTLY
V1.0.2
SHOW WIRED ETHERNET STATUS
SHOW WI-FI STATUS
SELECT WI-FI SSID & PASSWORD
Navigate down to “SELECT WI-FI SSID &
PASSWORD” and select your wireless network
name and password.
Personal Firewall Users
If you have trouble connecting and your
computer has a rewall installed, make sure
your rewall is congured to allow iTunes
music sharing.
Mac: Open System Preferences. Select the
Sharing icon and click on the Firewall tab.
Select the option “iTunes Music Sharing.”
PC: Refer to your rewall’s documentation
for opening incoming ports. Congure your
rewall to allow incoming connections on