Filter
Top Products
26
27
Safe Mode can also be entered manually by
powering SoundBridge off (by unplugging it
from power) and on again, while at the same
time pressing and holding any button on the
remote control.
Restore Factory Default Settings
To restore SoundBridge’s factory default
settings, press Menu, select “Change Library
or Conguration,” then select System
Conguration, then select “Reset to Factory
Defaults.”
Geeks — Read This
The SoundBridge has a command line
interface that you can “telnet” to for piddling
about. You will need to telnet to port
4444. Type “?” at the command prompt
to see a list of commands. We will be
documenting in more detail how to control a
SoundBridge in the coming months, as well
as updating the software in this area. When
documentation is available, it will be posted
on the developer section of our web site.