Filter
Top Products
100
Setting your m:robe
Setting the brightness and the backlight time of the LCD screen
Setting the brightness and the backlight time of
the LCD screen
You can adjust the brightness of the screen, and set the duration for the backlight to turn on after operating your
m:robe.
If the “HOME” screen is not displayed, touch in the top left corner of the screen, then touch “ HOME.”
1 Touch in the bottom right corner of the “HOME” screen to display the “m:robe
SETTINGS” screen, then touch “LCD.”
The “LCD” screen appears.
2 In “BRIGHTNESS,” touch (right) to brighten the screen, or touch (left) to
darken the screen.
3 Touch “3sec,” “15sec,” “30sec” or “ON” in “BACKLIGHT.”
4 Touch “OK.”
The “m:robe SETTINGS” screen reappears, and the setting is complete.
To return to the “HOME” screen
Touch in the bottom right corner of the screen.
Tips
• You will experience longer battery life if you operate your m:robe with the LCD on a low brightness setting, and the
backlight is set to a low duration (such as 3 seconds).
• To cancel the setting, touch “CANCEL” in step 4.
OK CANCEL
LCD
BRIGHTNESS
3sec 15sec 30sec ON
BACKLIGHT
00MR500i_E.book Page 100 Thursday, November 4, 2004 6:22 PM