Filter
Top Products
Set up your phone
18
Charge the battery
1. Plug the charger transformer into a standard wall outlet.
2. Connect the charger
to the phone.
If necessary, you can
use a CA-44 adapter
cable (1) to connect a
charger and the phone.
After a few seconds, the
battery indicator in the
display scrolls. If the
battery is completely
discharged, it may take a few minutes before the charging indicator appears
on the display or before any calls can be made.
■ Turn your phone
on or off
1. To turn your phone on or off, press
and hold the end key for at least
3 seconds.
2. Enter the lock code, if necessary,
and select OK.
■ Connect the headset
A compatible headset, such as HS-5, may
be included with your phone or purchased
separately as an enhancement. See
"Enhancements," p. 60 for information.
1. Plug the headset connector into the
Pop-Port™ connector at the bottom
end of your phone. appears on
the display.
2. Position the headset on your ear.
With the headset connected, you can
make, answer, and end calls as usual.
Use the keypad to enter numbers. Press the
call key to place a call. Press the end key to end a call.