Kenwood TH-D7A Portable Radio User Manual


 
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
31
FFO/NOrewoPtceleSdnaB
tsujdAleveLhcleuqSrotinoM
timsnarTtceleSrewoPtimsnarT
tceleSlennahCyromeM
lennahCyromeMtceriD
yrtnE
NOpmaLhctaLNOpmaL
tceleSnoitceriDtesffOesreveR
xelpuDlluFnacSyromeM
teseRlluF/laitraPtrelAenoT
kcoLreviecsnarTtceleSecnalaBoiduA
knalByalpsiDdnaB)E7D-HT(enoTzH0571
)derotS(rebmuNFMTD
timsnarT
MEMORY-TO-VFO TRANSFER
You may sometimes want to search for other stations or
a clear frequency, near the frequency stored in a
memory channel or the Call channel. In this case first
transfer the contents of a memory channel or the Call
channel to the VFO.
1 Recall the desired memory channel or the Call
channel.
2 Press [F], [VFO].
The entire contents of the memory channel or the Call
channel are copied to the VFO.
Note:
A transmit frequency from an odd-split memory channel or odd-split
Call channel is not transferred to the VFO. To transfer a transmit
frequency, press [REV], then press [F], [VFO].
Lockout status and memory names are not copied from a memory
channel to the VFO.
If you recall the Call channel in step 1, simply pressing [UP]/ [DWN]
also transfers the contents to the VFO. The frequency, however, is
changed by one step.
CHANNEL DISPLAY
When in this mode, the transceiver displays only
memory channel numbers (or memory names if stored)
instead of frequencies.
Press [A/B]+ POWER ON to switch the function ON (or
OFF).
Note: You cannot switch this function ON if you have not used both
bands A and B to store frequencies.
When in Channel Display mode, you can use only the
following functions: