Kenwood TH-D7A Portable Radio User Manual


 
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
4
seirettaB
dnaBFHV dnaBFHU
H L LE H L LE
enilaklA412233412203
Locking tab
Tab
INSTALLING ALKALINE BATTERIES
With an optional BT-11 battery case, you can use
commercially available alkaline batteries in such
occasions as camping or emergency operations.
1 To open the battery case cover, push on the locking
tab, then pull the cover.
2 Insert four AA (LR6) alkaline batteries.
Be sure to match the battery polarities with those
marked on the bottom of the battery case.
3 Align the two tabs on the battery case cover, then
close the cover until the locking tab clicks.
4 To install the battery case onto (or remove from) the
transceiver, follow steps 1 to 3 for INSTALLING THE
NiCd BATTERY PACK {page 2}.
Do not install the batteries in a hazardous environment where
sparks could cause an explosion.
Never discard old batteries in fire because extremely high
temperatures can cause batteries to explode.
Note:
It is recommended to use high quality alkaline batteries rather than
manganese batteries to enjoy longer periods of battery life. Do not
use commercially available NiCd batteries.
If you will not use the transceiver for a long period, remove the
batteries from the battery case.
Do not use different kinds of batteries together.
When the battery voltage is low, replace all four old batteries with
new ones.
The following table shows the approximate battery life
(hours) relative to the transmit output power.