Filter
Top Products
40
41
The Bluetooth speakerphone functions of V1BLUE allow easy conference calling and seamless switching
between music playback and making or receiving phone calls. When you make or receive a call, music
playback will pause and restart again once the call is complete. Incoming calls are notified with a call alert
tone and caller ID if available.
Dial the number and press SEND on the mobile phone as usual:
Placing a Call
Getting Started
Follow placement guidelines above.
Ensure your mobile phone is Bluetooth-capable and connected to the main unit. Refer to page 33 for
details.
Select any mode on the main unit using the FUNCTION/ button. You may listen to music if you
desire.
BLUETOOTH SPEAKERPHONE OPERATION
Speakerphone Placement and Use
The V1BLUE speakerphone is designed to provide excellent performance and voice clarity in a variety of
environments. V1BLUE integrates a high quality, adjustable microphone and Clarity CVC® (Clear Voice
Capture) echo and noise cancellation processing technology for the clearest sound. In order to get the best
performance from your system, please follow these guidelines for placement and use:
1) Choose a quiet environment. The microphone on the unit will pick up your voice, as well as some
amount of background noise. Using this unit in a quiet place will make it easier for the party you are
calling to hear your voice.
2) Minimize echo in the room. Using this unit in a room that has carpets, drapes and soft furnishings will
give better performance than using in a room with highly reective surfaces such as tile, concrete and
glass.
3) Keep in range of the microphone. The closer you speak to the microphone, the more clearly your voice
will be heard. If you are within 5-6 feet of the microphone you may talk at a normal volume and your voice
should be clear to the party you are calling. If you move beyond 6 feet, you will need to raise your voice in
order to be heard clearly. Use beyond 12 feet range is not recommended.
4) Choose a sensible listening volume. This unit is designed to perform best at moderate listening levels.
If you increase the volume too much, you may begin to hear an echo. The best listening level is normally
a maximum volume level of 13.
5) Adjust the microphone to point toward your voice. The microphone on this unit has a pick-up angle of
about 90
o
. If you will not be located directly in front of the unit when talking, adjust the microphone on the
top of the unit towards where your voice will come from. Standing directly to the side of the unit, or behind
it may result in reduced microphone pick-up.
6) Place the unit in line with your mouth. If you will be using this unit while sitting down, place the unit at
tabletop level, in line with the level of your mouth. Placing the unit on a high cabinet or on the oor may
reduce the pick-up of the microphone.
To end the call, press FUNCTION/ on your mobile phone,
on the main unit or on the remote.
Receiving a Call
To redial last number press and hold ANSWER/PAIRING
button for 5 seconds. The call will be placed automatically.
When a call is placed to your mobile you will hear an incoming call alert tone through the speakers of the
main unit
1
. The main display will show “CALLING” and display caller ID if available
2
.
To accept the call, press the ANSWER/PAIRING button on the
main unit or remote once, or answer the call via your mobile
handset in the normal way
3
.
The display shows “IN CALL.”
To reject the call, press the FUNCTION/ button on the main
unit or remote once, or reject the call via your mobile handset in
the normal way.
To transfer sound from the speaker to your mobile handset during
a call, press and hold ANSWER/PAIRING for 2 seconds
4
.
Display shows “TRANSFER.”
To transfer back, press and hold ANSWER/PAIRING again.
Display shows “TRANSFER.”
To end the call, press FUNCTION/ on the main unit or on the
remote or end the call via your mobile handset in the normal way.
Display shows “END CALL.”
Music playback automatically resumes.
If the other party ends the call rst, music will resume automatically.
1. The nature of the incoming call alert tone depends on the features supported by your mobile phone - it may be the
ring tone set on your mobile, or a default tone generated by the system.
2. Caller ID function is not supported by HSP prole.
3. Answering from the handset with HSP prole may force use of the handset and not speakerphone. If your mobile is
connected using HSP, please answer an incoming call via the remote or main unit.
4. Transfer function is not supported by HSP.
Display shows “END CALL.”
Music playback automatically resumes.
Music playback will automatically pause.
Display will show “DIALING.”
You will hear the ringing tone through the system.
Display shows “IN CALL” when other party answers.