Filter
Top Products
22
23
6. Press the
PLAY/PAUSE
button to begin programmed playback .
To play the programmed sequence again, press the PROG/CLK button then the PLAY/PAUSE
button.
To cancel the programmed sequence from the memory press the STOP/BAND button at
programming mode.
Programmed Repeat Playback
You can use the Programmed and Repeat Play ba
ck functions together to
continuously repeat a
programmed sequence.
Press the
REPEAT
button on the remote control twice.
Press the PLAY/PAUSE button to begin Programmed
Repeat Playback. The programmed sequence will be repeated
continuously.
MP3/WMA CD Playback
To skip quickly from a track in one directory to a track in another directory:
The PLAY/PAUSE, SKIP/TUNING , SKIP/TUNING and
STOP/BAND controls have the
same functions for MP3/WMA CDs as they do for normal CDs.
Load an MP3/WMA CD into the player. Wait until the reading process is completed.
Example: Let’s assume that you want to skip to Directory #
03/Track # 005
PLAYING MP3 & WMA CDS
You may see the flashing
“READ” indicator for a minute
or more before playback begins. This is normal
and not an indication of any problem with your player.
Most of the normal CD operations described in this manual also apply to MP3/WMA CDs. However there
are a few differences in MP3/WMA CD playback functions, and these are described on the following
pages.
MP3/WMA CD Reading Time and Display Information
Because MP3/WMA CDs contain so much more info
rmation than normal CDs this CD player will take
longer to read the table of contents information on an MP3/WMA disc.
Program up to 64 tracks as described above.
After you load an MP3/WMA CD the player will read each of the directories or albums on the disc, one
at a time, and display the number of directories and the cumulative number of tracks.
Press the PRESET/ALBUM/MENU + button repeatedly to
select album “03.” The track will show “48.”
Press the SKIP/TUNING button ve times the display
shows Track “53.”
For example if we insert an MP3/WMA CD containing “09”
directories or albums and a total of “193” les or tracks, the
display will shows as below. “MP3” or “WMA” indicates the
format of the les on the disc.
The “PRG” indicator remains on display. The player
will play all the tracks that you program med in the
desired sequence. After the last programmed track
has played the player stops, but the programmed
sequence remains in the memory.