Filter
Top Products
26
27
After you have entered up to 64 tracks in the Program Memory, press the PLAY/PAUSE
button to begin programmed playback.
.
.
1. Press the
PROG/CLK
button on the remote control.
MP3/WMA CD Programmed Playback
(On Remote Control Only)
Programming can only be done while the player is in
the Stop mode. If the MP3/WMA disc is playing,
first press the STOP/BAND
button to stop playback, then follow the programming steps below.
Track “001”, Program Number “P –01” and “PRG”
indicator appear.
2. Press the
PRESET/ALBUM/MENU +
button repeatedly
to select Album #05.
(The display shows Track #102, it means the first track
of Album #05 is #102.)
4. Press the PROG/CLK button again to enter Track 107
in program memory P- 01.
The program memory number advances to “P- 02”
In this example the MP3/WMA CD contains a total of 09 Directories (Albums) and
193
Tracks (Files).
Let’s assume that the first track we want to program is Track #03 in Album #05.
3. Press the SKIP/TUNING button repeatedly
to select track # 05 of Album #05 (#107).
5. Repeat Steps 2 through 4 to enter up to 64 tracks in the
program memory.
MEMORY CARD OPERATION
Playing MP3/WMA Audio Files Stored On SD/MMC Memory Cards
The player will read the information on the card and the display will
show the total number of files tracks and directories albums on the
card. For example “08” albums, “49” tracks.
Insert the SD or MMC flash memory card containing MP3/ WMA
audio files into the card slot by gently pressing into position until it
locks in place. Cards can only be inserted one way.
Press the PLAY/PAUSE button to begin playback.
Press SKIP TUNING or buttons to skip tracks.
Press PRESET/ALBUM/MENU +
or
–
buttons to skip albums.
Press SELECT ID3/BIT RATE button to display title, album and artist information.
Press
STOP/BAND
button to stop playback at any time
NOTE: The memory card slot on this system enables playback of songs only in MP3 and WMA formats
(without DRM). It cannot play songs purchased from iTunes or other songs in AAC format, songs in
ATRAC format or songs purchased from some online music retailers. It may be possible to convert your
music to one of the playable compressed formats, or burn it to an audio CD, depending on the DRM
restrictions.
You can program up to 64 tracks on an MP3/WMA CD, same as for a normal CD.
Repeat Steps 2 through 4 to enter up to 64 tracks in the
program memory.
Playback will continue until the last track has played and then the display will again show the total number
of tracks and albums on the card.
When programming the tracks on an MP3/WMA CD you must also select the directory number of the
tracks being programmed.
The display shows Album “01.”
Press the FUNCTION/ button repeatedly until the main display
shows “CARD.”