Filter
Top Products
7
Names of things and what they do
ig.names2.eps_60
POWER switch
Holding down the POWER switch turns
power on or off.
➜
“Turning power on/off” (p. 14)
Never switch off the power during playback/
recording, while connected to the PC via USB, or
while “Now Processing!” appears in the display.
(+) and (-) INPUT LEVEL buttons
The INPUT LEVEL buttons adjust the level of
the sound from the [Internal MIC ], [MIC
Input Jack ], and [LINE IN Jack ].
Pressing the (+) input level button increases
the input sound level. Pressing the (-) input
level button decreases the input sound level.
➜
“Adjusting recording levels” (p. 37)
AC ADAPTOR jack
This is the power jack.
Connect the included AC adaptor to this
jack.
➜
“Using the AC adaptor” (p. 14)
ig.names3.eps_60
HOLD switch
Set the HOLD switch to the ON position so
only the following buttons can be used and
to help prevent accidental operations.
Buttons remaining operable when the HOLD
switch is set to ON:
• [AUTO GAIN CONTROL Switch ]
• [EXTERNAL MICROPHONE TYPE Switch ]
• [LOW CUT Switch ]
• [MIC GAIN Switch ]
(+) and (-) HEADPHONE VOLUME
buttons
These buttons adjust the output sound level
when headphones are connected to the
[HEADPHONE jack ].
The volume cannot be adjusted for sound output via
a digital cable connected to the [HEADPHONE
jack ] (digital output).
HEADPHONE jack
(digital output connector)
This jack is used as both the HEADPHONE
jack and the digital output connector.
To listen with headphones, connect
headphones. To have digital output, connect
an optical digital cable (round mini-type).
➜
“Playing back” (p. 42)
Optical
Digital jack to connect optical cables.
151413
13
14
1
19
20
15
181716
16
21
22
23
24
17
18
18
18
R-09_e.book 7ページ ２００６年４月６日 木曜日 午後４時５１分