Filter
Top Products
33
Recording
The R-09 can use a dynamic microphone or a condenser microphone, such as the type that
are connected to the microphone jack of a PC.
fig.conmic-LR-e.eps_80
• If a cable is connected to the [LINE IN Jack], then the input from the [MIC Input Jack] is ignored.
Do not connect anything to the [LINE IN Jack].
• To prevent feedback when recording with a microphone, do not use speakers.
fig.power-onoff-e.eps_80
1.
Turn on power to the R-09.
Turn on power to the R-09. See “Turning power on/off” (p.
14)
2.
Set the sampling frequency.
“Configuring recording” (p. 26)
fig.open-set-e.eps_80
1. Show the <Menu Screen>.
Press and hold down the [FINDER/MENU Button] to show
the <Menu Screen>.
fig.recoedersetting-e.eps_80
2. Select “Recorder Setup.”
Use the [PLAY Button ] and [STOP Button ] to select
“Recorder Setup,” then press the [REC Button].
Using external microphones
Stereo microphone
L
R
Hold down
Hold down
Show
<Menu Screen>
Move the
cursor
up or down
Enter
R-09_e.book 33 ページ ２００６年４月６日 木曜日 午後４時５１分