Filter
Top Products
24
Using the R-09
Listen to the recorded voice.
fig.phones.eps_80
1.
Connect a playback device.
The R-09 does not have speakers. To listen to the playback,
headphones or speakers must be provided separately.
fig.play-start-e.eps_80
2.
Press the [PLAY Button ] to begin
playback.
When the [PLAY Button] is pressed, the song shown in the
display begins to play.
When “No Song” is shown in the display, there is no song that
the R-09 can play.
“Manipulating songs and folders” (p. 62)
fig.outputlevel-e.eps_80
3.
Adjust the volume.
Use [(+) and (-) HEADPHONE VOLUME buttons] to set the
volume to a comfortable level.
The volume cannot be adjusted for sound output via a digital
cable connected to the [HEADPHONE jack] (digital output).
See “Playing back” (p. 42) for details on playback.
Playing back
Play
Low
Volume
High
Rewind/Fast Forward
If the [RWD Button ] is held down during playback, the recording rewinds. If the
[FWD Button ] is held down during playback, the recording fast forwards. Once
these buttons are released, playback starts again.
R-09_e.book 24 ページ ２００６年４月６日 木曜日 午後４時５１分