Filter
Top Products
Chapter 1
iPod nano Basics
9
Setting the Backlight Timer
You can set the backlight to turn on and illuminate the screen for a certain amount of
time when you press a button or use the Click Wheel. The default is 10 seconds.
m
Choose Settings > Backlight Timer and choose the time you want.
Even if you don’t set the backlight timer, you can turn on the backlight at any time
by pressing any button or using the Click Wheel. After a few seconds, the backlight
turns off.
Setting the Language
iPod nano can be set to use different languages.
m
Choose Settings > Language and choose a language from the list.
Connecting and Disconnecting iPod nano
You connect iPod nano to your computer to download music, photos, and files, and to
charge the battery. Disconnect iPod nano when you’re done.
Connecting iPod nano
To connect iPod nano to your computer:
m Plug the included iPod Dock Connector to USB 2.0 Cable into a high-power USB port
on your computer (a USB 2.0 port is recommended), and then connect the other end
to iPod nano.
If you have an iPod nano Dock, you can connect the cable to a high-power USB port on
your computer, connect the other end to the Dock, and then put iPod nano in the
Dock.
Note: The USB port on your keyboard doesn’t provide enough power. You must
connect iPod nano to a USB port on your computer.
By default, iPod nano imports songs automatically when you connect it to your
computer. When this automatic download is done, you can disconnect iPod nano.