Filter
Top Products
Chapter 1 iPod nano Basics 11
To disconnect iPod nano:
1 Unplug the headphones if they’re attached.
2 Squeeze both sides of the Dock connector to disconnect the cable from iPod nano. If
iPod nano is in the Dock, simply remove it.
About the iPod nano Battery
iPod nano has an internal, non-user-replaceable battery. For best results, the first time
you use iPod nano, let it charge for about three hours or until the battery icon in the
top-right corner of the iPod nano display shows that the battery is fully charged. If iPod
nano isn’t used for a while, the battery might need to be charged.
The iPod nano battery is 80-percent charged in about two hours and fully charged in
about three hours. If you charge iPod nano while downloading files, playing music, or
viewing a slideshow, it might take longer.
Charging the iPod nano Battery
You can charge the iPod nano battery in two ways:
 Connect iPod nano to your computer.
 Use the iPod USB Power Adapter, available separately.
To charge the battery using your computer:
m Connect iPod nano to a high-power USB port on your computer. The computer must
be turned on and not in sleep mode (some models of Macintosh can charge iPod nano
while in sleep mode).
To remove the connector from your iPod nano,
squeeze the buttons on the sides and pull.