Site Setup • 2
2-5
Low postage warning
When this screen displays, you can enter a low postage warning value.
This value can be any value between zero and the maximum value the
meter is capable of storing. Whenever the amount of postage in the meter
is equal to or below the low postage warning value, a warning message is
displayed on the screen and the postage left field is shown in reverse video
as a reminder to add postage to your meter.
Postage upper limit
When this screen displays, you can enter a postage upper limit. The value
entered sets a cap on how much postage can be spent at one time. If during
an operation, the postage value requested exceeds the postage upper limit,
an error is displayed and the meter postage value is left unchanged.
Dollar unlock limit
When this screen displays, you can enter a dollar unlock limit. This is a
double check to ensure that an operator does not enter too high a postage
value by accident. If during an operation, the postage value equals or
exceeds the dollar unlock limit, the operator is required to confirm that the
postage is correct.
Meter codes
When this screen displays, you can enter a code (up to four alphanumeric
characters) for meter installation, meter removal and meter lock/unlock.
The codes initially default to "3336".
Meter activity log enable/disable
When this screen displays, you can enable or disable the meter activity
log. The meter activity log maintains a history of the meters which have
been installed in the system.
Meter date rollover time
When this screen displays, you can enter the time of day you want the
meter imprint date to change to the next day's date. After entering the time,
you are prompted for AM or PM.
