Site Setup • 2
2-7
Change Operator Info
Use the following procedure to view or change an operator's information.
1. Press the 'Change Operator Info' SoftKey
TM
. The screen prompts you for an
operator number.
2. Enter the desired number (1 thru 20) and press <ENTER>. The screen
displays the current settings and SoftKeys
TM
which allow you to change the
operator name, ID, and access level. If your system has two languages
installed, you are also able to change the language used.
3. Verify all information and make any desired changes. When you are satis-
fied with the information, press the <ENTER> key to save the data and
return to the OPERATOR ID SETUP screen which displays the list of
operators.
Add Operator
Use the following procedure to add an operator.
1. Press the 'Add Operator' SoftKey
TM
. The screen prompts you for the opera-
tor name.
2. Enter up to 20 alphanumeric characters and press <ENTER>. The screen
prompts you for the operator ID (password).
3. Enter up to 8 alphanumeric characters and press <ENTER>. This is the code
the new operator will use to log on to the system. The screen now displays
'Operator', 'Key Operator' and 'Supervisor' access level selections.
4. Press the SoftKey
TM
for the access level to be assigned to this operator (the
default is Operator), and then press the <ENTER> key. The screen displays
the current settings and SoftKeys
TM
which allow you to change the operator
name, ID, and access level. If your system has two languages installed, you
are also able to change the language used.
5. Verify all the information and make any desired changes. When you are
satisfied with the information, press the <ENTER> key to save the data and
return to the OPERATOR ID SETUP screen which displays the list of
operators.
Remove Operator
Use the following procedure to remove an operator.
1. Press the 'Remove Operator' SoftKey
TM
. You are prompted for the operator
number.
2. Enter the operator number (1 thru 20) and press <ENTER>. The screen
