A SERVICE OF

logo

Options
Problem
Solution
An optional interface
board is installed and
the printer does not
work properly.
The printer does not
print or the printout
is not what you
expect.
The interface board may be loose or not
properly connected. Check that the interface
board is fully inserted into the connector on
the back of the printer. See page
5-33.
You may not be using a compatible
interface board. Check if you can use the
interface with the
DFX-8000.
See page
5-33.
You may not be using the correct cable. Be
sure the cable matches the interface
specifications.
The DIP switches or jumpers on the
interface board may not be set correctly.
See the interface manual for the correct
settings.
The computer and interface settings may
not match. See the computer and the
interface manual to find the proper settings.
Troubleshooting
7-23