Options
Problem
The printout contains
regular gaps.
Skip over perforation
does not work.
Solution
The pull tractor sprockets and the built-in
tractor sprockets may not be aligned
correctly. Align the pull tractor and built-in
tractor sprockets.
The sprocket units may not be positioned
for the width of your paper. Move the
right
sprwket
unit to the right to remove
any slack in the paper or to the left to
remove any excess tension in the paper.
The paper may have too much slack along
its length. Press in the pull tractor feed
knob on the right and
turn it to remove
any excess slack. See page
5-9.
The paper may not meet the specifications
for the
DFX-8000.
Check that your paper is
of the proper size, weight, and thickness.
See pages
8-5
and
8-6.
The print head may be catching the binding
area of your multi-part forms. Turn on DIP
switch
3-7
to select the skip over binding
function. See page
3-16.
Skip over perforation may be set. Turn off
DIP switch
3-3.
See
page
3-18.
You may have turned on DIP switch
3-3
when the printer was on. To make any new
DIP switch settings effective, turn off the
printer and then turn it back on.
See page
3-7.
Troubleshooting
7-19
