Adjusting the Top of Form
Position,
3. Open the top cover.
4.
On the clear plastic ribbon mask, there is
a
red line
that
shows
you where the printer will print the bottom edge of your first
line of text. this position is based on the first
printable
line of
text. If your
software
inserts a top margin of five lines, your
text will actually be printed five lines below the top of form
position. Using the red line
as a reference, press the MICRO FEED
buttons to feed the paper to the desired top of form position.
Press the top or bottom
MICRO
RED button once to feed the
paper forward or backward 1/216th of an inch, or hold down
the button to move the paper continuously.
FEED
Note: The red line on the ribbon mask shows you where the
printer will print your first
line of
text only when the printer is in
top of form mode.
Using the Printer
3-35
