Epson 8000 Manual

A SERVICE OF

next previous

Paper Cutter

3.

If you loaded new paper onto the current tractor

since

the

host

time you cut off a document, you may need to adjust the

cutting position. Open the paper separator cover and use the

MICRO FEED buttons to adjust the cutting position with the

cutting line. Then close the paper separator cover.

Note:

You,can set the cutting position, from

0.1

inches

(3.0

mm)

to

1.0

inches

(25.4

mm) below the perforation at the end of the

last printed page. The factory setting of the cutting position is the

0.1

inches

(3.0

mm) position below the perforation;

4.

Press the TEAR OFF button. The printer cuts off your printed

document and feeds the fresh paper back to the top of form

position.

5-24

Using the Printer Options