A SERVICE OF

logo

Open as PDF
next previous
Printing
Problem
Solution
The printout is faint.
The printout is
faint.
The printing on the
last pages
of
your
multi-part
forms is
faint.
Parts of printed
characters
or graphics
are missing.
The bottom parts
of
characters
are
missing,
as shown here:
ABCD
A blank line runs
through your
characters, as shown
here:
ABCD
The ribbon may be worn out. A worn
ribbon can damage the print head. Install a
new ribbon cartridge as soon as possible.
See page
6-4.
Use copy mode to print clearer, darker
characters on the last pages of your
multi-
part forms. To select copy mode, press the
FORM FEED/COPY
button when the
ON LINE
light is on. The printer beeps twice to
indicate it is in
copy mode. See page
2-29.
The ribbon cartridge may not be installed
properly. Remove the ribbon cartridge and
reinstall
it.
Make’
sure the cartridge hooks
are securely connected to the printer.
See page
l-9.
The print head is damaged. Stop printing
and contact your
Epson dealer to have the
print head replaced.
7-6 Troubleshooting