Options
Problem
solution
When you press the
FEED
or LINE
ITED
button, the
printer does not feed
the paper.
The
puper
jams
or
does
tiot
feed
smoothly.
The printer may be on
line..Before
you
press the
FDRM
FEED
or
LINE FEED
button
to
feed the paper, be sure
Wprinter
is off line
(the ON LINE light is out). See
page 3-4
The
paper cutter may not be correctly
ins-.
Remove the paper cutter and then
rein&l
it, making sure the mounting
notches and pins fit together properly.
See page
5-19.
The paper
cut&r
may cut the paper so that
the perforation at the end of the last printed
page remains
with
the
paper loaded in
the
printer. This perforation may cause a paper
jam. Use the
MICRO
FEED buttons to position
the
paper so that the perforation at the end
of the last printed page is even with or just
past the cutting
he.
Be sure to set the page
length to match your paper. See page
5-24.
You may be using multi-part forms that
vary in
thickness
with the paper cutter.
Multi-part
forms that vary in thickness
include forms with labels on them and
forms that overlap
sbghtly
where they are
glued together. Do not use these forms
when the paper cutter is installed.
see page
5-19.
There may be some obstacle, such as a
cable, in the way of the paper or something
on top of the paper supply.
TroubIeshooting
7-21
