Options
Problem
Solution
The paper cutter
is
in&a&&and
the
printtwdoe6notfwtj
continuous
p8pa
properly (continued).
I
The paper supply may be too far from the
printer. Position the paper supply within
3.28
feet
(1
meter) of the printer.
The rear cover may be open. Close the rear
cover before trying to feed the paper.
The paper may be caught on the paper
separator. Be sure the edge of the first page
emerges below the paper separator.
The sprocket units may not be positioned
for the width of your paper. Move the
right sprocket unit to the right to remove
any
slack in the paper or to the left to
remove any excess tension in the paper.
The paper may not meet the specifications
for the
DFX-8000.
Check that your paper is
of the proper size, weight, and thickness.
Seepages&5and&6.
The print head may be catching the binding
area of your multi-part forms. Turn on DIP
switch
3-7
to select the skip over binding
function. See page
3-16.
7-22
Troubleshooting
