A SERVICE OF

logo

1 – 38
Chapter 1 Troubleshooting
FIP-11 007-344/007-346/007-347/007-348 Restart Printer
Is the printer on the
flat surface?
NoYes
Possible causative parts:DRIVE ASSY FUSER (PL5.2.25)
PWBA MCU (PL9.1.16)
Checking the MOTOR
ASSY FUSER
Checking the printer installation
No
Yes
Replace the PWBA
MCU. (RRP9.7)
Reseat the printer to
the flat surface.
Does the MOTOR ASSY
FUSER function normally?
Checked by [Digital Output] - [DO-1f]
in [IOT Diagnosis].
In the test, close the INTERLOCK
SWITCH.
Reseat the DRIVE ASSY
FUSER. (RRP5.5)
No
Yes
Does the MOTOR ASSY
FUSER function normally?
Checked by [Digital Output] - [DO-1f]
in [IOT Diagnosis].
In the test, close the INTERLOCK
SWITCH.
Replace the DRIVE ASSY
FUSER. (RRP5.5)
END