A SERVICE OF

logo

2 - 29
Chapter 2 Operation of Diag.
Tray 4 No Paper (DI-1e)
1) Remove the Tray 4.
2) Turn on the power and enter the Diagnostic Mode.
3) Execute the DI-1e.
4) Move the Actuator No Paper on the Paper Pickup Assembly of
Tray 4 to check the sensor by finger.
Check the number on the control panel is counted up.
5) Press the “CANCEL” key to stop the test.
6) Reseat the Tray 4.
Toner Sensor Y/M/C/K (DI-
18/19/1a/1b)
NOTE: Very difficult to check.
Sensor name (Diag. Code) Confirmation procedures
Ida_Sec02_022FA
Actuator
4)
Operator Panel