2 - 54
Chapter 2 Operation of Diag.
Cassette 1 Feed Solenoid
(DO-56)
1) Turn on the power and enter the Diagnostic Mode.
2) Execute DO-56.
3) Press the “CANCEL” key to stop the test. Upon pressing the
“CANCEL” key, confirm the operation noise of the solenoid is
heard.
Combination test is as follows.
NOTE: The Paper Feed Roller of Tray 1 rotates when the DO-0 and
DO-56 are executed. The following procedures are for the technical
staff.
1) Remove the 500 Sheet Paper Tray of Tray 1.
2) Turn on the power and enter the Diagnostic Mode.
3) Execute the DO-0 and DO-56. Confirm the rotation of the
Paper Feed Rollers viewing from the removed Paper Tray
portion.
4) Press the “CANCEL” key to stop the Cassette 1 Feed Solenoid
test (DO-56 test).
5) Press the “ ” key to display the DO-0.
6) Press the “CANCEL” key to stop the Main Motor (DO-0 test).
7) Reseat the 500 Sheet Paper Tray.
Motor, Clutch and Solenoid
name (Diag. Code)
Confirmation procedures
Ida_Sec02_045FA
Paper Feed Roller
