3 - 195
Chapter 3 Removal and Replacement Procedures (RRPs)
RRP9.3 LOW VOLTAGE POWER SUPPLY (LVPS) (PL9.1.6)
[Removal]
1) Remove TOP COVER FRAME. (RRP1.1)
2) Remove RIGHT SIDE COVER. (RRP1.7)
3) Remove LEFT SIDE COVER. (RRP1.12)
4) Remove COVER ASSY REAR. (RRP1.5)
5) Remove HIGH VOLTAGE POWER SUPPLY (HVPS). (RRP9.9)
6) Remove DUCT LV. (RRP7.13)
7) Remove TONER DISPENSER ASSEMBLY. (RRP7.4)
8) Remove LVPS ASSY. (RRP9.2)
9) Remove HARNESS ASSY AC INLET. (RRP9.4)
10) Remove six screws (silver, 6 mm) that fix LOW VOLTAGE POWER SUPPLY (LVPS) to BOX
ASSY LVPS (PL9.1.4), remove LOW VOLTAGE POWER SUPPLY (LVPS).
[Replacement]
1) Attach LOW VOLTAGE POWER SUPPLY (LVPS) to BOX ASSY LVPS using six screws
(silver, 6mm).
2) Attach HARNESS ASSY AC INLET. (RRP9.4)
3) Attach LVPS ASSY. (RRP9.2)
4) Attach TONER DISPENSER ASSEMBLY. (RRP7.4)
5) Attach DUCT LV. (RRP7.13)
6) Attach HIGH VOLTAGE POWER SUPPLY (HVPS). (RRP9.9)
7) Attach COVER ASSY REAR. (RRP1.5)
8) Attach LEFT SIDE COVER. (RRP1.12)
9) Attach RIGHT SIDE COVER. (RRP1.7)
10) Attach TOP COVER FRAME. (RRP1.1)
