2-61
Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide, R7.0
Chapter 2 Alarm Troubleshooting
2.7.79 FE-DS3-SA
2.7.79 FE-DS3-SA
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
SONET Logical Object: DS3
The Far End DS-3 Equipment Failure Service-Affecting condition occurs when there is a far-end
equipment failure on a 15310-CL-CTX, ONS 15310-MA DS1-28/DS3-EC1-3, or ONS 15310-MA
DS1-84/DS3-EC1-3 DS-1 port that affects service because traffic is unable to switch to the protect port.
Clear the FE-DS3-SA Condition
Step 1 To troubleshoot an FE condition, determine which node and port link directly to the card reporting the
FE alarm.
Step 2 Log into the node that links directly to the port reporting the FE condition.
Step 3 Clear the main alarm. Refer to the appropriate alarm section in this chapter for troubleshooting
instructions.
Step 4 If the condition does not clear, log into the Technical Support Website at
http://www.cisco.com/techsupport for more information or call Cisco TAC (1-800-553-2447).
2.7.80 FE-EQPT-NSA
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
SONET Logical Object: DS3
The Far End Common Equipment Failure condition occurs when a Non-Service-Affecting (NSA)
equipment failure is detected on a far-end 15310-CL-CTX, ONS 15310-MA DS1-28/DS3-EC1-3, or
ONS 15310-MA DS1-84/DS3-EC1-3 DS-1 port.
Clear the FE-EQPT-NSA Condition
Step 1 To troubleshoot an FE condition, determine which node and port link directly to the card reporting the
FE condition.
Step 2 Log into the node that links directly to the port reporting the FE condition.
Step 3 Clear the main alarm. Refer to the appropriate alarm section in this chapter for troubleshooting
instructions.
Step 4 If the condition does not clear, log into the Technical Support Website at
http://www.cisco.com/techsupport for more information or call Cisco TAC (1-800-553-2447).
2.7.81 FE-FRCDWKSWBK-SPAN
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
SONET Logical Object: OCN
