Tascam HS-8 MP3 Player User Manual


 
TASCAM HS-8 7
This product is designed to help you record and
reproduce sound works to which you own the
copyright, or where you have obtained permission
from the copyright holder or the rightful licensor.
Unless you own the copyright, or have obtained the
appropriate permission from the copyright holder
or the rightful licensor, your unauthorized recording,
reproduction or distribution thereof may result in
severe criminal penalties under copyright laws and
international copyright treaties. If you are uncertain
about your rights, contact your legal advisor. Under no
circumstances will TEAC Corporation be responsible
for the consequences of any illegal copying performed
using the recorder.
Precautions for placement and use
The guaranteed operating temperature range of this
product is 5º - 35º C (41º- 95º F).
Do not install in the following types of places. Doing
so could degrade the sound quality and/or cause
malfunctions.
Places with significant vibrations or that are
otherwise unstable
Near windows or other places exposed to direct
sunlight
Near heaters or other extremely hot places
Extremely cold places
Places with bad ventilation or high humidity
Make sure that the unit is mounted in a level position
for correct operation.
In order to promote the emission of heat, do not place
anything on top of this product.
Do not place this product on top of a powered
amplifier or other equipment that emits heat.
Beware of condensation
If the unit is moved from a cold to a warm place, or
used immediately after a cold room has been heated or
otherwise exposed to a sudden temperature change,
condensation could occur. Should this happen, leave the
unit for one or two hours before turning the unit on.
Cleaning the unit
Wipe the unit with a soft dry cloth to clean it. Do not use
any benzine, paint thinner, alcohol or other chemical
agents. Doing so could damage the surface of the unit or
cause fading.
Cleaning the display
Slightly wipe the display with a soft dry cloth that does
not shed dust (e.g. a cleaning cloth). Avoid wiping with a
stiff cloth or rubbing with force. Doing so could damage
the surface of the LCD. Do not use benzene, thinner,
manicure remover, alcohol or similar substances.
About CF cards
The capacities and performance of your HS-8 will vary
based on the speed and abilities of the Compact Flash
(CF) media used. Older and some cheaper Compact
Flash (CF) cards use slower memory components and
little internal buffering which results in poor recording
performance. Newer CF cards, particularly those made for
high-precision DSLR cameras, not only perform reading
and writing faster, but also come in larger storage size.
A list of CF cards that we have confirmed to work with this
unit is provided on our website (http://www.tascam.com).
If a CF card is used that has not been confirmed, this unit
might not operate correctly.
CAUTION
We can accept no responsibility for any loss of the data you record
using this product onto a CF card.
Precautions for use
CompactFlash cards are precision devices. To prevent
damage to the card or the slot, please observe the
following cautions.
Do not leave a CF card in an extremely hot or cold
location.
Do not leave a CF card in an extremely damp
location.
Do not allow a CF card to become wet.
Do not place any object on top of a CF card, or twist
or bend it.
Do not subject a CF card to strong impact.
Do not insert or remove a CF card during recording,
playback, data transfer or other operations that
access a card.
1 − Introduction