Filter
Top Products
TASCAM HS-8 21
CAUTION
Never turn the power OFF during recording, playback, or anything
else that accesses the CF card. Doing so could, for example, cause
recording errors, loss of recorded data, and sudden loud noises to
be output through monitoring equipment, which could result in
damaged equipment and hearing loss.
Setting the time of the built-in clock
1 Press the MENU key on the front panel to open the
MENU
screen.
2 Touch the
SYSTEM
SETUP
button to open the
SYSTEM
SETUP
screen.
3 Touch the
CLOCK
ADJUST
tab to open the page
where you can set the built-in clock.
4 Touch the item that you want to change, and use
the DATA dial on the front panel to change the
value.
5 Touch the
SET
button, or push the DATA dial to
confirm the setting.
NOTE
After purchasing this unit, set the clock before making your rst
recording. If you do not set the clock, the time stamps on recording
les will not be correct
Panel lock function
Press the MENU key while pressing and holding the HOME
key on the front panel to open the
LOCK
SETUP
screen
where you can disable or enable operation from the front
panel.
The front panel is divided into two sections, which can be
locked and unlocked separately.
If you press the button for a section, it changes from
UNLOCK
to
LOCK
(with a yellow background) and the
locked area appears dimmed.
If the display is touched when the LCD section is locked,
the following pop-up window message appears.
3 − Preparation