Filter
Top Products
20 TASCAM HS-8
About the display
Adjusting the display angle
Push the LCD TILT btton to unlock the display, and then
pull the bottom of the display forward to adjust the angle.
Pull the bottom of the display until you hear a clicking
sound.
To restore it to its flat position, push the LCD TILT button
again to unlock the display, and push the bottom of the
display. Do not push the display surface. Push the bottom
of the display until you hear a clicking sound.
CAUTION
Do not push the display screen itself.
Adjusting the display and indicator
brightness
Turn the DATA dial while pressing and holding the HOME
key to adjust the brightness of the color display, the
PAUSE, REC and PLAY keys, and the JOG (SHUTTLE), SLOT
1 and SLOT 2 indicators.
Push and turn the DATA dial while pressing and holding
the HOME key to adjust only the brightness of the color
display.
CAUTION
The display can easily be scratched, so do not use pointed
•
objects, including ngernail tips, to touch it. Always touch it
with your ngers.
Do not press the display forcefully with a nger or poke it with a
•
pen, toothpick or other pointed object. Doing so could scratch
the display or cause malfunction.
The display touch panel is comprised of a lm and glass. Do
•
not apply a strong force to its surface. Doing so could break the
glass.
When using the display, do not put a hand on the panel or push
•
around the display forcefully. Doing so could prevent accurate
position detection.
Do not place anything on top of the display or otherwise put
•
weight on the same place for a long time. Doing so could cause
the panel to warp or result in inaccurate position detection.
Do not apply a commercially-available screen protection lm to
•
the display. Doing so could prevent normal operation.
Gently wipe the display with a soft dry cloth that does not shed
•
dust (e.g. a cleaning cloth). Avoid wiping with a sti cloth or
rubbing with force. Doing so could damage the surface of the
LCD. Do not use benzene, thinner, manicure remover, alcohol or
similar substances.
NOTE
The display is produced with extremely high-precision manufac-
turing technologies, and 99.99% or more of the pixels are eective,
but sometimes pixels might not appear or might appear as red or
black dots. This is not a malfunction.
Turning the power ON and OFF
Open the front panel POWER switch cover to turn the
power ON with the switch.
Startup screen
Home Screen
To turn the power OFF, push the switch on the front panel
again.
3 − Preparation