Filter
Top Products
Notes on Use
Self-diagnostics function
The unit has a self-diagnostics display function.
This function displays the current condition of the unit
as a five-digit code (a combination of a letter and
numbers) on the analog video output. If a five-digit
code is displayed, check the following code chart. The
last two digits (indicated by DD) will differ depending
on the state of your unit.
Code
C:21:DD
C:22:DD
C:31:DD
C:32:DD
Symptom
Moisture
condensation has
occurred.
The video heads are
dirty.
To prevent the unit
from malfunctioning,
the self-diagnostics
function has taken
over.
To prevent the unit
from malfunctioning,
the self-diagnostics
function has taken
over.
Remedy
Remove the cassette
and keep the cassette
lid open and turn the
power on. After waiting
more than one hour,
insert the cassette
again.
Clean the heads using
the cleaning cassette
(supplied).
• Remove the cassette,
or turn on/off the unit.
• Disconnect the AC
adaptor. After
reconnecting it,
operate the unit.
• Turn on/off the unit.
• Disconnect the AC
adaptor. After
reconnecting it,
operate the unit.
If you are unable to resolve the problem, or a code
other than those in the above chart appears, contact
your Sony dealer or local authorized Sony service
facility and inform them of the number.
54
Chapter 4 Maintenance