Filter
Top Products
CONTROL S
jack
RESET button
DV IN/OUT
connector
LANC jack
INPUT jacks
DC IN 12V
connector
AUTO REPEAT
switch
OUTPUT jacks
NTSC/PAL
select switch
Connects to other video devices that have a LANC
jack. You can operate the unit from other video
devices.
i.LINK and the i.LINK logo are trademarks and
indicate that this product is in agreement with IEEE
1394-1995 specifications and their revisions.
• You cannot operate the ejection of a cassette from a
device connected to the LANC jack.
• The LANC jack on the unit has only LANC-S
functions. The unit has no LANC-M functions.
DV IN/OUT connector (4-pin)
INPUT jacks
Used to input analog video and audio signals. To
connect a VCR equipped with S-video output, use the
S VIDEO connector on the unit.
DC IN 12V connector
Used to input/output a digital signal that complies with
the i.LINK standard (Recommended cable: VMC-
IL4415(A),VMC-IL4615(A)). Use when an external
device which you want to connect to the unit has a DV
jack. If you connect the unit and the other device using
DV jacks, you can minimize deterioration of picture
quality during recording, dubbing or capturing still
pictures into a personal computer by digital
processing. For details, refer to the instruction manual
of the equipment you use.
AUTO REPEAT switch
Used to repeat the playback of all or a part of the tape.
For details on the auto repeat function, see "Auto Repeat"
on page 32 .
Chapter 1 Overview 11