Filter
Top Products
Chapter
Adjusting and Setting
Through Menus
Changing the menu settings
1
The unit allows you to set various parameters in the
menus. Before you start using the unit, set the internal
clock in CLOCK SET on the OTHERS menu. Except
for clock setting, you can use all other factory-set
default parameters but change them as needed.
Pressing the buttons on the Remote
Commander, select the menu icon you want to
change, then press the SET button on the Remote
Commander.
If the internal backup battery is exhausted, the menu
settings will be initialized. The internal backup battery
is fully charged if you connect the power to the unit
for about 10 hours. The menu settings will be kept for
about one month.
Displaying the menu
2
3
4
5
Pressing the
want to change, then press the SET button.
Pressing the buttons, change the setting.
Press the SET button to return to the submenu.
Repeat steps 2 to 4, as needed.
buttons, select the submenu you
Press the MENU button on the Remote Commander.
The menu is superimposed on the analog video output.
RETURN, then
buttons, select
Pressing the
To return to step 1
press the SET button.
To exit from the menu
Press the MENU button again.
Submenus
Icons
Chapter 3 Adjusting and Setting Through Menus
41