Filter
Top Products
Recording
To video equipment without a DV jack
Recorder
Monitor
Player
Other VCR
DSR-11
to the audio
output jacks
to the video output
jack
to the S-video
output connector
to the LANC jack
Audio cable (not supplied)
Video cable (not supplied)
S-video cable (not supplied)
LANC cable (not supplied)
Signal flow
Connect either an S-video cable or a video cable as the cable for video
signals.
• When recording analog input signals, this unit can digitally output the
signals from the DV IN/OUT connector for backup. Set DV EE OUT on
the VTR SET menu to ON.
For details on the VTR SET menu, see "VTR SET menu" on page 43).
• When you connect the output jacks of this unit to the input jacks of the
player, select the input correctly with the INPUT SELECT selector on this
unit to prevent a humming noise or distortion of the picture.
• Distorted signals (e.g., when played back at a speed other than normal)
will not be recorded properly.
• The LANC connection transmits signals such as control signals, time
code, time counter data, and status data.
' Jacks labeled CONTROL L have the same function as LANC jacks. Jacks
labeled REMOTE may also have the same function.
Chapter 2 Playback and Recording
36