Filter
Top Products
Playback
• The data codes are also displayed by setting DATA CODE on the
DISPLAY SET menu. You can change the displayed item in the same
way as described above.
Example
Menu setting : CAMERA
Display
:
camera
data—>
no indicator
—>
recording date/time
—>
camera data
For details on the DISPLAY SET menu, see "DISPLAY SET menu " on page 45
• Camera data items show the settings of a tape recorded by a digital
camcorder (DSR-200/200P, 200A/200AP, PD100/PD100P, PD100A/
PD100AP, PD150/PD150P, 250/250P, etc.). This unit cannot record
camera data.
• When the data codes were not recorded, "- - -" appears instead.
• Some of the camera data items displayed on the monitor screen by this
unit are different from those shown by the digital camcorder.
Displaying various data
You can check various data items such as the time code, tape remaining
time, etc. on the monitor screen. These data items are useful for normal
recording/playback operation.
An item with * is displayed when you press the DISPLAY button on the Remote
Commander.
You can hide the item by pressing the DISPLAY button again.
Cassette memory indicator*
This is shown when a cassette with cassette memory has been loaded.
Tape transport mode indicator*
Displays the tape transport mode.
Chapter 2 Playback and Recording
26